Tag Archives: machinery farm

China FT200.21.015 Clutch Disc Assembly For Foton Lovol agricultural machinery & equipment Farm Tractors agricultural wearing parts

Condition: New
Guarantee: 3 months
Applicable Industries: Machinery Repair Stores
Fat (KG): 1.2 KG
Showroom Area: None
Video outgoing-inspection: Not Obtainable
Machinery Take a look at Report: Not Available
Advertising Kind: New Merchandise 2571
Sort: Shafts
Use: Tractors
Product Title: None
Packaging Specifics: opp
Port: HangZhou

Specification

item	Brake light-weight swap
Condition	New
Place of Origin	China,ZheJiang
Package measurement(CM)	252510
Gross bodyweight(KG)	1.5

Advise Merchandise Business Profile Certifications Packing & Delivery FAQ 1. who are we?We are primarily based in ZheJiang , China, begin from 2018,offer to Africa(forty.00%),South Asia(20.00%),Jap Asia(twenty.00%),Japanese Europe(ten.00%),North The usa(10.00%). There are whole about 5-ten individuals in our office.2. how can we ensure quality?Usually a pre-creation sample just before mass productionAlways last Inspection ahead of shipment3.what can you get from us?Lovol tractor parts, Diesel motor vertical shaft CZPT PTO Drinking water pump tractor pto Drive shaft for brush cutter PTO Drive Shaft for Agriculture Use Quanchai components,Foton tractor portion,Weichai areas,tractor engine parts4. why need to you acquire from us not from other suppliers?Our business is engaged in CZPT tractor components, with far more than 10 several years of services expertise at property and abroad, with very good specialist expertise and enough stock.5. what solutions can we offer?Accepted Delivery Phrases: FOB,CFR,CIF,EXW,Express Delivery；Accepted Payment Forex:USD,EUR, Device spindle bearing 7008CTYNSULP4 7008C Japan angular make contact with ball bearing 7008CTYNSULP4 bearing HKD,CNYAccepted Payment Kind: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Funds,EscrowLanguage Spoken:English, seventeen inch eighteen inch 1500W-3000W bike modified electrical motor vehicle motor DC brushless sprocket motor Chinese

agriculturalparts

Agricultural Parts

Agricultural parts are a large part of the farming process. They are used for a number of purposes, including harvesting and transportation of crops. The parts are made from a variety of different materials, including metal, plastic and rubber. These materials have various advantages, including being resistant to pesticides and herbicides. In addition, they are easy to clean, allowing them to last for years.

Mechanization of farming

Agricultural mechanization, the use of mechanical technology to perform agricultural processes, has been an important tool in the modernization of agriculture. It increases farm worker productivity by replacing manual labor with powered machinery. It also provides employment opportunities for young people. Agricultural mechanization also has important environmental effects. It improves land usage and enhances agricultural productivity.
In Tanzania, agricultural mechanization has been slow but steady in the past few decades. In fact, the speed of mechanization growth varies across regions. In some parts of the country, the share of cultivated land plowed by tractors has reached around 50 percent.
The main drivers of agricultural mechanization in Tanzania are agroecological conditions and socioeconomic developments. This demand for mechanization depends on the capacity of farmers to fully use the machines and their complementary technologies.
The demand for mechanization has grown in parts of the country where there is a high demand for more intensive farming. In these regions, population growth has influenced the evolution of the farming system. This has led to a gradual transition from deep tillage to more intensive land preparation methods.
Mechanization has also been a catalyst for improved crop yields. Improved crop yields can be sold in markets and create indirect benefits for women. Women are commonly involved in weeding, transportation and postharvest management of agricultural produce.
The demand for mechanization has also been influenced by the growing share of the urban population. The urban population is expected to grow to 50 percent of the total population by 2030. The majority of rural-to-urban migrants are educated young people who are more likely to think of farming as a business.
In some parts of Tanzania, agricultural mechanization has been promoted by the public sector. This was in part a result of the government’s implementation of the Economic Structural Adjustment Program (ESAP). Public sector promotion of agricultural mechanization included the development of mechanization services, increased tractor supply, and the promotion of public-private partnerships.
agriculturalparts

CZPT Brand (r)

Agricultural machinery parts from CZPT Brand are renowned for their excellent quality. These parts are compatible with many agricultural engines including John Deere, Perkins & Massey Ferguson (r), Case IH, Ford, Detroit Diesel, and Komatsu (r) engines. These replacement engine parts ensure excellent durability and performance. They are also designed to meet the high standards of the original equipment manufacturer.
CZPT brand replacement agricultural parts are manufactured by a global company that is dedicated to consistently supporting its customers. The products are also designed to meet the needs of different types of agriculture. Their products are manufactured with the highest quality standards and they are backed by a 12-month warranty. This makes them the preferred parts supplier. They also have an extensive network of dealers across the globe.
CZPT Brand is a global company that specializes in providing high-quality engine parts for various agricultural machinery. It also specializes in providing replacement parts for tractor engines. It offers replacement gearboxes for a variety of engine types including John Deere, Detroit Diesel, and Cummins (r) engines. The parts are also compatible with lawn mowers and rotary cutters.
Agricultural machinery parts from CZPT Brand are known for their durability and excellent quality. They also offer lighting for optimum visibility and rear and side lights for maximum visibility. This ensures that the agricultural machinery performs at its best. These parts are also known for their excellent service. They are backed by a dedicated service team that is available to help you with any issues.
CZPT Brand agricultural parts are a perfect solution for John Deere, Perkins & Masey Ferguson, Case IH, Ford, Detroit Diesel, Komatsu (r) and IVECO Tector (r) engines.
agriculturalparts

CZPT Manufacturing

Founded in 1977, CZPT Manufacturing produces agricultural parts and accessories, primarily for use with farm equipment. The company began with a single page flyer at a farm trade show. In less than 50 years, the company has grown into a thriving, nationwide producer of agricultural replacement parts.
Currently, the company stocks parts for numerous manufacturers and offers a variety of products. These include personal protective equipment, knives, gathering chains, and forage harvester replacement parts. The company also offers apparel, including long-sleeved and youth shirts. The company also offers a fast and convenient shipping process.
China FT200.21.015 Clutch Disc Assembly For Foton Lovol agricultural machinery & equipment Farm Tractors agricultural wearing parts
editor by czh 2023-07-03

China Agricultural Machinery Spare Parts / Farm Machinery Parts /Cultivator Parts with Free Design Custom

Product Description

Product Discription:

We can manufacture different sorts of cultivator level with hot die forging approach,so our items are much better than casting and stamping elements,now our items have been offered to numerous european nations and have been warmly welcomed by them,underneath is our merchandise details:

one,Material:65Mn or some other materials which consumer asked for.

two,Warmth Treatment method:HRC45-50 or some other hardness which consumer requested.

three,Floor remedy:Shot Blasting and then do black portray or some other colour painting which consumer requestd

4,Producttion Products:630Ton,1000Ton,1600Ton,2500Ton Press.

FAQ:

one. Are you a real maker?Sure, all items showed in our site are created in our ISO9001:2015 certified manufacturing unit We are also a firm registered by China Customs with the correct to export and import.

2. I want to hold our design in confidence can we signal NDA?Positive, to safeguard customers’ earnings is our compulsory obligation, signed NDA would be legitimate to the two of us..

3. What need to I supply to get your quotation?Please provide us your thorough information for the merchandise, this kind of as drawings with Second/3D by software Pro/E, Car CAD, SolidWorks, UG and so on as properly as materials, area treatment method, amount, package. Any special specifications must be highlighted specially for tolerance.

four.How prolonged does it get to acquire samples?
twenty doing work days,the direct time is the basic generation period and does not incorporate the transportation time.
we can source totally free samples with less amount,but customers want to spend shipping value.

five.How prolonged is the producing direct time?
Mass Production:thirty-forty five working days following sample acceptance by yours.The direct time is the general manufacturing time period with out the transportation time.
We could make some specific creation arrangement efficiently if consumer has urgent want.

6.How prolonged does it get to ship items from China by sea?
It normally takes about 5 months to European ports furthermore 1 week customs clearance, so you can get the container in 6 to 7 weeks.It takes about 2 weeks to east coastline and 3 weeks to west coast US ports.All sea items are shipped from HangZhou Port.

7.How extended does it just take to ship items from China by air?
It takes about 7 days to all major locations.

8.What are the payment terms?
Payment phrases are negotiable and will enhance for prolonged term clients.In the course of the first levels, we ask for 50% of tooling charge in advance with the balance payable on acceptance of samples.Creation orders can be negotiable.We desire thirty% deposit and the stability by T/T prior to sails.But sometimes T/T15 days right after sails would also satisfactory.

nine.New merchandise improvement process
Acquired tooling buy and sample purchase with 50% deposit—Maintain a meeting with the relation dept.To ensure the building schedule—Style mould, fixture and gauge and generating them in our manufacturing facility—mould.fixture and gauge creating—creating samples—approved from consumer-getting substance-forging-warmth therapy-shot blasting-machining-Inspection-deal—delievry

ten.Which countries do you export to?
Now primarily export to U.S.A, Germany, France, Italy, Uk, Brazil, Swedish, Japan, Korea, Middle east of Asia, Thailand and so on.

eleven.Can we visit the factory to carry out an audit?
Yes, you are welcome to go to our factory.

12.How to manage the complains?
–If come about any issues following supply,remember to just present us photos and element compliants points, we will check with the production department and QC office Instantly and give you greatest resolving solution which agreed by both of us,furthermore we will bear all the price (such as delivery value).

All parts are produced in accordance to customer’s drawings or samples.If you have any parts to be created, please feel free to deliver your sort drawings/samples to us.Technical drawings including content mark, Merchandise excess weight, Purchase quantity.The extensive info will support us speedily estimate the exact and sensible price for you.

US $0.5-8
/ Piece
| 500 Pieces

(Min. Order)

###

Processing Object:	Metal
Molding Style:	Forging
Molding Technics:	Hot Die Forging
Application:	Agricultural Machinery Parts
Material:	Steel
Heat Treatment:	Quenching

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

US $0.5-8
/ Piece
| 500 Pieces

(Min. Order)

###

Processing Object:	Metal
Molding Style:	Forging
Molding Technics:	Hot Die Forging
Application:	Agricultural Machinery Parts
Material:	Steel
Heat Treatment:	Quenching

###

Samples:	US$ 1/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

Types of agricultural parts

Agricultural parts can be divided into different categories. These components include tractors, moldboard plows, whips and sickles. Some of the different types of agricultural ingredients are listed below. Each of these parts is important for different types of farming. It is important to know the purpose of each and what it does. If you are a farmer or plan to become a farmer, these parts are critical to your operation.
agriculturalparts

Tractor

The first tractor appeared in the 1920s. Ford and International Harvester were among the first companies to produce farm tractors, but the industry has grown rapidly. By the 1920s, hundreds of companies were producing farm tractors. The agricultural depression of the 1930s forced many of these companies out of business. By the 1930s, only seven companies were major players in the tractor business. Ford produced the largest number of wheeled tractors in the United States between 1930 and 1955.
Some tractors are equipped with various accessories to enhance their performance. These specialized agricultural components are used for a variety of tasks. These include tillage, harvesting, planting and material handling. Tractors vary in horsepower, lift capacity, control and capabilities. Some models also have device mounting options. The downside of this is that if you need to use the tractor for other purposes, you will have to use additional attachments that can damage the tractor.
Modern tractors have a clutch pedal on the gear lever. This allows you to shift quickly without pedaling. Other tractors have a throttle speed button that improves hydraulic flow to the implement. However, the most important component of a tractor is the engine. Tractors must be driven safely because even minor accidents can cause serious damage to farm equipment. While there are many tractors that can operate without these parts, you can find the right tractor for your job.

Shared plows

One of the many uses of shared plows as part of agriculture is to increase the amount of soil in a field. This plow effectively removes compacted soil and lifts weed roots. According to the University of Nebraska-Lincoln Institute for Agriculture and Natural Resources, plowshares are best used in the fall, when weeds are less active and the soil is more fertile.
The basic plowshare can be adjusted by raising or lowering the plowshare to suit runners in the furrow. However, this design is not suitable for breaking up the heavier soils of northern Europe. In the 6th century, however, the advent of the wheel made it possible to use larger moldboards, which increased food production and population growth. Today, farmers in North America have access to a wide variety of moldboard plows.
Agricultural moldboard plows come in two basic styles, horse-drawn or tractor-style. Horse-drawn models have one bottom, while tractor-pulled moldboard plows have 1 to 14 hydraulically raised bottoms. Other variants include intermediate breakers and twin moldboard plows. Agricultural moldboard plows are often used in the Midwest and elsewhere.

Grass

Grass is used for mowing. The blade is double edged and bolted to the wooden handle. Steel blades are tempered and braced for strength and durability. The blade can be sharpened if necessary. The straw whip is 30 inches long, which can be a good or a bad thing depending on the user’s height. Blades can be sharpened with sandpaper or a file.
The traditional straw whip 32 includes a rear panel and horizontal shelves. It also features a hollow handle with an adapter at the proximal end and a carrying handle at the distal end. The first cable goes to the power supply and goes through the case and handle. After pulling the cable taut, the straw will be firmly attached to the small holder 8.
The suction tube 32 is connected to an electrical connection 47 that powers the device. A battery pack is provided for use away from the tractor. It is a plastic or metal box and consists of two parts: a rechargeable battery 67 and a female electrical plug 68. The switch locks in the open position to prevent accidental use. The switch is also equipped with a safety lock button. These two components work together to operate the straw.
agriculturalparts

Scythe

Although it is generally believed that the scythe was first developed in Roman times, its actual development may be earlier. Pliny mentioned two different types of sickles, Gallic and Roman. The Gallic sickle was the longer of the two and was made of mild steel, while the Roman sickle was made of harder, higher carbon steel.
In the past, people cut wheat by hand with a sickle. They replaced scythes and bagging hooks, which required users to bend over to harvest crops. Although they have largely been replaced by tractor machinery, scythes are still used today in parts of Asia and Europe. The sickle can also reach awkward corners, making it more useful in certain types of cuts.
The sickle belt stretches from Europe to the Middle East and the Midwest of the United States and Canada. It also spans most of Russia, the Middle East and North Africa. In the 19th century, Austrian sickle makers dominated the sickle industry. They produced millions of sickles, some dating back to the 1500s. Some of them were exported to India and the former Soviet Union.

Brushcutter

Brushcutters are powerful agricultural tools used primarily for felling and trimming vegetation. These parts are often multifunctional, and some models are even capable of maintaining road edges and ditches. Some models can even trim branches from certain types of trees. Before you buy your own brush cutter, be sure to read the manual carefully and follow the safety rules. For your own safety and the safety of others, please wear a hard hat, eye and hearing protection, padded gloves, long pants, and boots, and keep young children away from work areas.
Brushcutters are usually attached to the tractor via a 3-point linkage system, with the exception of high reach models that are attached to the tractor via fixed stirrups. Additionally, brush cutters often have a balancing mass located opposite the tractor. These agricultural components are complicated to install, but once installed, they remain coupled to the tractor. A brush cutter is a critical piece of equipment on any tractor.
Most brushcutters use hydraulic engines. The power is transmitted mechanically through a PTO (power take-over) mechanism or a cardan shaft, which turns a hydraulic pump. This pump draws hydraulic oil from a special tank and then sends it through a series of distributors to move the arm and the working organ. As a result, the power of the brush cutter is transferred from the tractor to the working organ by a hydraulic engine.
agriculturalparts

Transplanters

Transplanters for agricultural parts are equipment used to plant seedlings into soil. These machines are used in greenhouses and open fields to increase productivity, yield, and the success of harvesting transplanted crops. Transplanters are typically made of steel and are designed to fit seedlings of all shapes and sizes. Buying a used transplanter is a good idea as long as the working parts are in good condition. When considering a used model, you should inspect it for cracks or corrosion and broken parts.
A mechanical transplanter works faster than hand transplanting, but it becomes slower as your quads and back start hurting. Water-wheel transplanters have become popular in recent years. By automatically delivering water into the holes where the transplants are set, water is delivered to the root system without the need for manual intervention. Moreover, water-wheel transplanters save time on watering. John Good, a farmer who uses a water-wheel transplanter, says that speed is no different between a mechanical transplanter and a water-wheel one.

Cultivatorsw

The basic purpose of cultivators is to turn soil and plant matter into a workable form for the crops. Cultivators are used by both large and small farmers. Cultivators for small farming operations are usually self-propelled, but may be drawn behind a tractor. Two-wheel cultivators are typically fixed and powered by couplings, while four-wheel cultivators are attached via a three-point hitch and operated by power take-off. Some cultivators are still drawn behind a draft animal, and the methods are still used in many developing countries.
Cultivators are used in farming to break up soil around a crop. There are three different kinds of cultivators: row crop cultivators, disc cultivators, and power cultivators. Row crop cultivators are used to break up soil before planting, while harrows are used to prepare the soil for planting. In both cases, cultivators are used to disturb the soil consistently throughout the working width. In general, cultivating soil improves aeration and disrupts photosynthesis. Moreover, it can decrease water ponding time after heavy rainfall.
Cultivators are important parts of agricultural machinery. They aerate soil, prepare the seedbed, and kill weeds. By disrupting the soil, cultivators are used to evenly distribute chemical applications. Among them, glyphosate is the most common and widely used weed killer. It is safe for farmers to use, and it effectively eliminates most weeds in a single application.

China Agricultural Machinery Spare Parts / Farm Machinery Parts /Cultivator Parts with Free Design Custom
editor by czh 2023-01-04

China Professional OEM Powder Coating Good Quality Stand Farm Machinery Parts near me manufacturer

Product Description

Product Description

Product Name:	Agricultural machinery parts
Material:	Steel/Stainless steel/Alumium/Brass/Copper
Surface Treatment:	Hot dip galvanized/Powder coating/Zinc Plated/Nickel Plated/Heat treatment/Chrome Plateing/Electrophoresis/Blackening/PVC coating etc.
Size:	OEM Customized
Processing:	Stamping/Punching/Bending/Tapping/Milling/Lathe/Welding/Assembly/Laser cutting
Grade:	First Class
Thread:	Coarse,Fine
Certification:	ISO9001,SGS,CTI,ROHS
Industry:	Agricultural machinery
Country of origin:	China

Same Type of Product

EMAX Capability

1.Press:Our stamping machine is from 5Ton to 400Ton(Our max punch 400Ton),we can stamp steel with 12-16mm thickness.
2.Finish we always do:Hot dip galvanized,Zinc Plated,Nickel Plated,Chrome Plated,E coating(electrophoresis),Powder coating,Polish for Stainless steel,Anodizing for Aluminum,and pickling for copper/brass.
3.Material we always use:Q235B steel(S235 in EU),Q345 steel(S355 in EU),Q500 steel(S500 in EU),DC01/SPCC cold rolled steel,Aluminum(6061 or 5053),Copper(T1).
4.Welding and assembly:Hand and Robot Welding,Arc Welding,Co2 protection Welding,or Aluminum Welding.
5.Progressive tooling:We can make progressive CZPT by ourselves.
etc.

Factory

Packing&Delivery

Custom Photo

FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in 4 different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right 1 for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
splineshaft

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting 1 or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
splineshaft

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is 1 of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least 1 ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to 1 another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the 2 shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
splineshaft

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has 2 groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other 2 pressure angles. It is often used when the splined shaft material is harder than usual.

China Professional OEM Powder Coating Good Quality Stand Farm Machinery Parts near me manufacturer

China OEM Crank Loader Tine Farm Machinery Part near me supplier

Product Description

All kinds of load fork

We have kinds of rake teeth
Material:; 60Si2Mn
HRC:; 34-42
Color:; According to customer’s requirement
Forging mold stripping gradient:; 1~3&deg&semi;
We can produce rake teeth according to sample or drawings.;

Worm Shafts and Gearboxes

If you have a gearbox, you may be wondering what the best Worm Shaft is for your application. There are several things to consider, including the Concave shape, Number of threads, and Lubrication. This article will explain each factor and help you choose the right Worm Shaft for your gearbox. There are many options available on the market, so don’t hesitate to shop around. If you are new to the world of gearboxes, read on to learn more about this popular type of gearbox.

Concave shape

The geometry of a worm gear varies considerably depending on its manufacturer and its intended use. Early worms had a basic profile that resembled a screw thread and could be chased on a lathe. Later, tools with a straight sided g-angle were developed to produce threads that were parallel to the worm’s axis. Grinding was also developed to improve the finish of worm threads and minimize distortions that occur with hardening.
To select a worm with the proper geometry, the diameter of the worm gear must be in the same unit as the worm’s shaft. Once the basic profile of the worm gear is determined, the worm gear teeth can be specified. The calculation also involves an angle for the worm shaft to prevent it from overheating. The angle of the worm shaft should be as close to the vertical axis as possible.
Double-enveloping worm gears, on the other hand, do not have a throat around the worm. They are helical gears with a straight worm shaft. Since the teeth of the worm are in contact with each other, they produce significant friction. Unlike double-enveloping worm gears, non-throated worm gears are more compact and can handle smaller loads. They are also easy to manufacture.
The worm gears of different manufacturers offer many advantages. For instance, worm gears are 1 of the most efficient ways to increase torque, while lower-quality materials like bronze are difficult to lubricate. Worm gears also have a low failure rate because they allow for considerable leeway in the design process. Despite the differences between the 2 standards, the overall performance of a worm gear system is the same.
The cone-shaped worm is another type. This is a technological scheme that combines a straight worm shaft with a concave arc. The concave arc is also a useful utility model. Worms with this shape have more than 3 contacts at the same time, which means they can reduce a large diameter without excessive wear. It is also a relatively low-cost model.

Thread pattern

A good worm gear requires a perfect thread pattern. There are a few key parameters that determine how good a thread pattern is. Firstly, the threading pattern must be ACME-threaded. If this is not possible, the thread must be made with straight sides. Then, the linear pitch of the “worm” must be the same as the circular pitch of the corresponding worm wheel. In simple terms, this means the pitch of the “worm” is the same as the circular pitch of the worm wheel. A quick-change gearbox is usually used with this type of worm gear. Alternatively, lead-screw change gears are used instead of a quick-change gear box. The pitch of a worm gear equals the helix angle of a screw.
A worm gear’s axial pitch must match the circular pitch of a gear with a higher axial pitch. The circular pitch is the distance between the points of teeth on the worm, while the axial pitch is the distance between the worm’s teeth. Another factor is the worm’s lead angle. The angle between the pitch cylinder and worm shaft is called its lead angle, and the higher the lead angle, the greater the efficiency of a gear.
Worm gear tooth geometry varies depending on the manufacturer and intended use. In early worms, threading resembled the thread on a screw, and was easily chased using a lathe. Later, grinding improved worm thread finishes and minimized distortions from hardening. As a result, today, most worm gears have a thread pattern corresponding to their size. When selecting a worm gear, make sure to check for the number of threads before purchasing it.
A worm gear’s threading is crucial in its operation. Worm teeth are typically cylindrical, and are arranged in a pattern similar to screw or nut threads. Worm teeth are often formed on an axis of perpendicular compared to their parallel counterparts. Because of this, they have greater torque than their spur gear counterparts. Moreover, the gearing has a low output speed and high torque.

Number of threads

Different types of worm gears use different numbers of threads on their planetary gears. A single threaded worm gear should not be used with a double-threaded worm. A single-threaded worm gear should be used with a single-threaded worm. Single-threaded worms are more effective for speed reduction than double-threaded ones.
The number of threads on a worm’s shaft is a ratio that compares the pitch diameter and number of teeth. In general, worms have 1,2,4 threads, but some have three, five, or six. Counting thread starts can help you determine the number of threads on a worm. A single-threaded worm has fewer threads than a multiple-threaded worm, but a multi-threaded worm will have more threads than a mono-threaded planetary gear.
To measure the number of threads on a worm shaft, a small fixture with 2 ground faces is used. The worm must be removed from its housing so that the finished thread area can be inspected. After identifying the number of threads, simple measurements of the worm’s outside diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth space is made using epoxy material. The casting is moulded between the 2 tooth flanks. The V-block fixture rests against the outside diameter of the worm.
The circular pitch of a worm and its axial pitch must match the circular pitch of a larger gear. The axial pitch of a worm is the distance between the points of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in 1 revolution. The lead angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s speed transmission ratio is based on the number of threads. A worm gear with a high ratio can be easily reduced in 1 step by using a set of worm gears. However, a multi-thread worm will have more than 2 threads. The worm gear is also more efficient than single-threaded gears. And a worm gear with a high ratio will allow the motor to be used in a variety of applications.
worm shaft

Lubrication

The lubrication of a worm gear is particularly challenging, due to its friction and high sliding contact force. Fortunately, there are several options for lubricants, such as compounded oils. Compounded oils are mineral-based lubricants formulated with 10 percent or more fatty acid, rust and oxidation inhibitors, and other additives. This combination results in improved lubricity, reduced friction, and lower sliding wear.
When choosing a lubricant for a worm shaft, make sure the product’s viscosity is right for the type of gearing used. A low viscosity will make the gearbox difficult to actuate and rotate. Worm gears also undergo a greater sliding motion than rolling motion, so grease must be able to migrate evenly throughout the gearbox. Repeated sliding motions will push the grease away from the contact zone.
Another consideration is the backlash of the gears. Worm gears have high gear ratios, sometimes 300:1. This is important for power applications, but is at the same time inefficient. Worm gears can generate heat during the sliding motion, so a high-quality lubricant is essential. This type of lubricant will reduce heat and ensure optimal performance. The following tips will help you choose the right lubricant for your worm gear.
In low-speed applications, a grease lubricant may be sufficient. In higher-speed applications, it’s best to apply a synthetic lubricant to prevent premature failure and tooth wear. In both cases, lubricant choice depends on the tangential and rotational speed. It is important to follow manufacturer’s guidelines regarding the choice of lubricant. But remember that lubricant choice is not an easy task.

China OEM Crank Loader Tine Farm Machinery Part near me supplier

China Best Sales Harvester Bearing Seat Customization Casting Steel Farm Machinery Bearing Steel Part Farm Machinery Parts Vertical near me factory

Product Description

GEAR MATERIALS
20CrMnTi/20CrMnMo for your choice

CASTINGS MATERIALS
Gray cast iron HT250 according to standard GB/T 1348-2009
Ductile iron QT450-10 according to standard GB/T 1348-2009
Cast steel ZG310-570 according to standard GB/T 5613-2014

SHAFTS MATERIALS
40Cr,45#,20CrMnTi,20CrMnMo for your choice according to your request.

POWER
To ensure the correct use of the product we recommand to pay attention to the specifications mentioned on our technical
sheet.Consider also the input rotation speed,the power input and the transmission ratios.Where the rotation or other working
conditions are different,please contact LongQuan technical department.

LUBRICATION
The reducer is usually supplied without lubricant.The recommended quantity of lubricant is indicated on our catalogue and the
first replaced must be done after 50-60 hours of running,then replaced after 600-800 working hours.
The emptying of the gearbox should be made immediately after the working,with the oil still hot,in order to avoid the deposition
of sludge.Check frequently the oil level and top up the oil whenever necessary.

Supporting Ball Screws

In order to use a ball screw in a project, it is important to support it for rotation. Typically, this requires holding brackets and roller bearings. Longer screws may require bending or critical speed restraints. End machining may be necessary to fit the screw into the bearing. Connection to a motor requires coupling and appropriate machining. Tables or support rails may be necessary to restrain the nut.

Cost

In this report, you’ll get an in-depth analysis of the ball screw market. You’ll learn about the competitive landscape, product portfolio, and growth prospects across regions. The report will also include information on the market’s various drivers and restraints, as well as the factors driving or restraining its development. You’ll also get an in-depth look at the value chain and PEST analysis, which are important components of a market study.
One resource that you can use to research the Ball Screw market is CZPT. This website contains a database of authentic Indian manufacturers, suppliers, and importers. You’ll find contact details and email addresses of the companies, including those that produce a wide variety of different types of ball screws. CZPT even allows you to search by product category. That way, you can find a supplier based on the type of ball screw you need at the lowest price.
Another benefit of ball screws is their ability to operate in very delicate applications. In electric vehicles, they are often used to replace a common hydraulic system. They are also used to control gates at hydroelectric stations. You can also find them in motorised inspection tables, step photolithography machines, and microscopic integrated circuits. You can find hundreds of different ball screw designs, and you can even purchase them with nuts, wipers, and CZPT. Ball screws have several bearing balls, which help transfer load between nut and screw. They can be available with adjustable preload and non-preloaded options. And they’re manufactured to industry standards to meet the demands of their users.
If you’re looking for a reliable, high-performing screw, you’ll want to opt for a ball screw. These have high performance-to-cost ratios. You’ll need to choose between a lead screw and a ball screw, but both are reliable and efficient. Besides, the former is less expensive and offers great design flexibility. They’re corrosion-resistant and can even be self-locking for vertical applications.
air-compressor

Applications

A ball screw and nut assembly are essential components of a variety of important actuation and control devices. The 2 components rely on the ability of the screw to rotate easily while converting the rotation into precise lateral movement. Ball screws are a common component in computer-controlled motion-control systems. The precision of ball screw rotation is essential for the accurate adjustment of flight control surfaces. In addition, ball screws are important components of wire bonding and computer-controlled motion-control systems.
Ball screws are highly accurate, requiring minimal lead error. The lead error of a screw is the difference between the theoretical and actual distance traveled by the nut during rotation. The lead error of a ball screw depends on several factors, including the manufacturing accuracy of the ball grooves, the compactness of the assembly, and the set-up precision. This error is not constant from lead to lead, but it may be reduced through preloading, lubrication, and increased mounting accuracy.
The ball is urged to move up and down by rotation of the nut, which is preferably a hexagonal shaft. This allows the ball to be raised easily over the land of the screw. It is important to note that the nut has a groove on the outer surface that is deep enough to accommodate a ball. This groove is deep enough to accommodate a ball, and the groove extends the length of the screw, thereby reducing friction and increasing precision.
The recirculated balls in a multi-start ball screw assembly may cross multiple threads and turn in the circuit. Multi-start ball screw assemblies typically use the internal channel method to recirculate balls. This design allows multiple ball nuts to be used in a single nut and can be easily installed. The ball nut and the nut may also be incorporated into several separate circuits. If several recirculation paths are desired, a ball nut and a multi-start system may be used.

Durability

A key feature of ball screws is their durability. During manufacture, a ball screw’s material must be chosen carefully. A corrosion-resistant steel called Cronidur(r) 30 is an ideal choice. Ball screws made from this material are exceptionally reliable in space due to their alternating steel-ceramic architecture. As the conditions of space are extreme, corrosion-resistant materials are essential to ensure optimum performance. CZPT has decades of experience manufacturing high-quality ball screws. Besides providing a complete range of ball screws, the company also offers technological solutions and dedicated components.
CZPT developed a special design for the High-Durability Precision Ball Screw. This design makes it easier to form a thin film of oil on the material’s surface. This oil helps reduce friction and improve the precision of a ball screw. This material’s special microstructure reduces the wear of ball screws and improves their service life. CZPT also aims to improve the wear-resistance of ball screws.
In addition to the axial load, a ball screw’s life rating should be based on the jacking and vertical loads. In other words, if all load balls are in contact with the raceways, the L-10 life rating of ball screw assemblies would be converted to an L-2 life rating. This change would increase the overall reliability of a ball screw to 98%. Then again, it’s important to note that vertical load is the only 1 that would be completely removed from the chart.
In addition to these important considerations, it is essential to operate ball screws within their recommended operating temperature range. Failure to do so could result in thermal expansion of the ball screw, causing positioning errors. To ensure lubrication of the ball screw, it’s important to keep its operating temperature within the recommended range. However, it is possible to operate it at temperatures that are too high. If this occurs, the screw should be sent to the manufacturer for repair.
air-compressor

Size

Besides their obvious use, ball screws come in 2 sizes, large and small. Although small balls should not show significant wear, they should still be used to enhance the screw’s durability. This can be difficult to determine because screw rebuilders tend to overlook this aspect. So, what is the best size for ball screws? This article will look at both sizes and what they mean for the screw’s durability. Also, we’ll look at some of the things to keep in mind when choosing the right size for your project.
A ball screw’s size depends on its application and performance requirements. Some types have small diameters and fine leads, while others feature large diameters. High precision applications often require miniature ball screws. Some manufacturers even offer compact ball screws with a smaller outer diameter. The latter is commonly found in miniature designs and feature diameters up to 25 mm. However, this doesn’t mean that a smaller diameter means less accuracy. Regardless of the size, you’ll want to make sure to select a screw that will meet your requirements.
The screw’s root diameter is a critical measurement in determining critical speed and column load calculations. A ball screw’s minor diameter is the minimum dimension of the screw shaft at the bottom of the ball grooves. In addition, the idler ball is a necessary component of a ball screw. It prevents friction between the load and idler balls, but does not carry the load itself. Likewise, the non-operating load capacity should be large enough to prevent the balls from brinelling and plastic deformation.
The characteristic speed is the rotational speed at which the ball screw begins to vibrate due to dynamic load. Inch/imperial screws are specified for 1 million revolutions, while metric screw has a specific limit for 1 million inches of linear travel. Various manufacturing processes have their own ways to calculate the useful life of ball screw assemblies. For example, Precision Grinding produces the lowest lead errors. In addition, the life of a ball screw depends on the length of the screw and the mounting support for the end bearings.
air-compressor

Maintenance

It is critical to regularly perform PM on your ball screw assemblies to ensure optimal performance. A dirty ball screw assembly will result in poor performance and faster wear, so removing dirt from the nut and shaft is a good idea. If there are problems with the ball nut, the lubricant inside can become stripped or the nut can become dirty due to chemical exposure. You should also check for oxidation or corrosion on the contact surfaces of the ball screw, and replace it if necessary.
The first sign of a deteriorating ball screw is excessive vibration. This may be caused by a bent screw shaft or misaligned bearing housings. If it makes noise when running, this may be due to excessive build-up or a broken return tube. Other issues may be caused by endplay in support bearings or excessive preload or improper lubrication. If any of these problems are found, it is essential to perform regular maintenance on the ball screw to prolong its life.
Getting regular maintenance on the ball screw assembly is important. If the screw is not properly maintained, it may wear out prematurely. If this happens, you can contact a ball screw repair service. CZPT International, Inc., a leading supplier of industrial parts, can help you get the screw back into optimal working order or find a new one. A ball screw repair company can help you avoid the inconvenience of downtime and maximize your productivity.
It is essential to properly lubricate a ball screw assembly in order to prolong its life. Lubrication can prevent corrosion and increase the life of the screw by 85 percent. It is important to remember that the type of lubricant you use should correspond to the load applied to the assembly. Lubrication should also be done at regular intervals. Once you’ve established the right amount of lubrication, you can then apply it on the screw.

China Best Sales Harvester Bearing Seat Customization Casting Steel Farm Machinery Bearing Steel Part Farm Machinery Parts Vertical near me factory

China Custom Customize High Precision Farm Machinery Agriculture Farm Die Casting Aluminum Alloy Tractor Spare Parts with Hot selling

Product Description

Investment Casting Steel Agricultural Machinery Spare Parts

Item name	Investment Casting Steel Agricultural Machinery Spare Parts
Material	Cast iron,alloy steel
Application	Agricultural Machinery
Drawing Accepted	Solid Works, PRO/Engineer, AutoCAD(DXF, DWG), PDF, TIF, IGS, STP
Manufacture type	Die casting, Investment casting, Die casting, Gravity casting, Forging, etc
Inspection	100% inspected before delivery
MOQ	1000PCS

Product Image

Other Product

Port
HangZhou or according to customers’ requirement
Packaging & Delivery
agricultural machinery spare parts package details:
1. Foam rubber and bubble film layered packaging for profile;
2. For accessories we use carton packaging to avoid damaging and missing;
3. For profile frame we use wooden box packaging;
4. According to customer’s request.
Company Information
Jingdian Technology Co., Ltd. is a solution supplier who offers metal hardware accessories for the fields from construction, electromechanical, automotive, railway, agricultural machinery, furniture and engineering machinery etc..
Besides, we integrates the design, production, research and development of the bracing products – support and hanger for the construction field, and the service such as the comprehensive optimization of BIM pipeline and related supporting service. Main scope: Gravity Bracket, Anti-drop Bracket, Anti-seismic Bracket, Pipeline Bracket, Fasteners and related accessories etc..
Jingdian Technology holds the principle of ” Quality First, Service Priority”, we expect to meet with you the esteemed customers from all over the world, we will offer high quality product and extreme service!
Product Certificate

FAQ

Are you trading company or manufacturer ?	We are factory.
How long is your delivery time?	It is according to quantity.
What is your processing?	Stamping,Welding,ForgingDrawing,Die casting,Injection,and Hardware.
Can you make my designs?	Yes, OEM/ODM is welcome.
What is the quality of your product?	We specialized in high quality products.

The Benefits of Using Self-Lubricating Bushings for Your Next Pivot

Like any other auto part, control arm bushings wear out over time. This results in an increase in irritating vibrations that can be dangerous in severe cases. The bushings in the control arms also wear out due to the stress that extreme driving conditions put on the control arms. Additionally, environmental factors and oversized tires tend to transmit more vibration through the bushing than conventionally sized tires. Whatever the cause, bushings can be the source of many problems.
bushing

wear and cracking

The main cause of dry valve side bushing cracking is a mismatch in thermal expansion of the core and flange. This situation can seriously compromise the safety of the power system. To improve the safety of dry valve side bushings, the crack development of epoxy impregnated paper under various conditions was investigated. A coupled thermomechanical simulation model was also used to study the cracking process.
The first step in diagnosing the cause of bushing wear and cracking is a visual inspection. The bushing of the lower control arm is fixed to the frame by a bracket. If there are any visible cracks, it’s time to replace the bushing. However, there is no need to replace the entire suspension. In some cases, worn bushings can cause a variety of problems, including body lean, excessive tire wear and cornering noise.

Maintenance free

If you’re considering maintenance-free bushings for your next pivot, you’ll be wondering what to look for in these components. The bushing protects the housing from corrosion and keeps the bushing under pressure. However, many users are not familiar with what these components can do for their applications. In this article, we’ll look at several examples of truly maintenance-free pivots and discuss their requirements.
One of the most popular types of maintenance-free bushings are flanged and parallel. Unlike worm gear bushings, these self-lubricating metal bearings are ideal for a variety of applications and conditions. They reduce failure and downtime costs while providing the long-term lubrication required by other types of bushings. Since these sleeves are made of lead-free material, they are RoHS compliant, which means they are environmentally friendly.Another common maintenance-free bushing is plastic. This material is easier to find off-the-shelf and relatively inexpensive to produce. However, it is not suitable for high load applications as it will crack under heavy loads and damage mating parts. Plastics can also deviate if the manufacturing process is imprecise. Plastic bushings can also crack when subjected to high loads.
bushing

self-lubricating

When using a self-lubricating bushing, there is no need to apply grease to the bushing. Oily liquids tend to attract dirt and grit, which can wear away the graphite prematurely. By eliminating the need for regular lubrication, you will reduce equipment maintenance costs. This article will explore the benefits of self-lubricating bushings. You will love your kindness.
Self-lubricating bushings have a strong base material to withstand radial bearing pressure while providing shaft support at the contact surfaces. The material also has good fatigue properties and low friction motion. Self-lubricating bushings can be used in environments with high temperatures and aggressive media. These products can also withstand enormous pressure. When using self-lubricating bushings, it is important to select the correct material.
The main advantage of using self-lubricating bushings is ease of maintenance. They don’t require oil to run and are cheaper to buy. Their main benefit is that they can significantly reduce your machine running costs. These bearings do not require oiling operations, reducing maintenance costs. These bearings also offer a simplified mechanical design due to their thin walls and high load capacity. In addition, they reduce noise levels while maintaining excellent wear resistance. Plus, their materials are ROHS compliant, which means they don’t require oil.
Hydropower installations are another area where self-lubricating bushings have proven their advantages. They reduce maintenance costs, extend equipment life, and improve environmental benefits. For example, the Newfoundland Power Company uses self-lubricating bushings in the gates of its hydroelectric power plants. These self-lubricating bushings eliminate grease from entering waterways and tailraces. As a result, power companies are able to reduce maintenance and costs.

compared to cartilage in the human body

What is the difference between tendon, bone and cartilage? Human cartilage is composed of collagen and elastic fibers. In contrast, fibrocartilage contains more collagen than hyaline cartilage. Both cartilage types are composed of proteoglycans, which have a protein backbone and glycosaminoglycan side chains. These components work together to provide structure and flexibility to the cartilage.
Bone is a combination of living and dead cells embedded in a matrix. The outer hard layer of bone is dense bone, and the inner layer is spongy, containing bone marrow, blood vessels, nerves, etc. Bone contains both organic and inorganic substances, and this process of hardening of the matrix produces bone. On the other hand, cartilage consists of chondrocytes and a matrix composed of collagen and elastin fibers. Compared to bone, cartilage is yellow and contains elastic fibers.
Although bone and cartilage are structurally identical, cartilage is more flexible. It is mainly found in the joints and respiratory system and requires flexibility. Its ingredients include collagen and proteoglycans, which provide compression and abrasion resistance. Furthermore, connective tissue is composed of cells, fibers and matrix.
The basic substance of cartilage is chondroitin sulfate, which is derived from animals. Although cartilage grows more slowly than bone, its microstructure is less organized. There is a fibrous sheath covering the cartilage, called the perichondrium. The molecular composition of the ECM plays an important role in the function of cartilage. The collagen matrix is important for cartilage remodeling and consists of changes in the collagen matrix.
bushing

Compared to metal-on-bone contact

Both metal-on-bone contact are known to cause a significant increase in the pressures in a joint. To compare the two, we first calculated the joint contact pressures in each model and compared them. The results of this study support previous research on this subject. The following sections discuss the benefits of both types of contact. They also outline some key differences between the two.

China Custom Customize High Precision Farm Machinery Agriculture Farm Die Casting Aluminum Alloy Tractor Spare Parts with Hot selling